51cg

Dr Henry Tan

Dr Henry Tan
Dr Henry Tan
Dr Henry Tan

Senior Lecturer

Accepting PhDs

51cg
Email Address
h.tan@abdn.ac.uk
Telephone Number
+44 (0)1224 272684
Office Address

School of Engineering, 51cg, Fraser Noble Building (room 375), King's College, Aberdeen, AB24 3UE, United Kingdom

School/Department
School of Engineering

Biography

Dr Henry Tan is a Senior Lecturer in Safety and Reliability Engineering at the 51cg. He graduated from , which US News & World Report ranked #1 of the Best Global Universities for Engineering. Dr Tan publishes scientific findings in top research journals, such as Physical Review Letters, Journal of the Mechanics and Physics of Solids, and Safety Science. 

Dr Tan is a Chair Professor at . He is also the Chairman of the International Symposiums on Energy Challenges and Mechanics, a series that facilitates the multidisciplinary study of energy solutions from an international perspective, and the International Symposium on Quantum Science and Technology.

Dr. Tan was a Guest Professor at the School of Aeronautics and Astronautics, , China (2008-2012), Invited Lecturer of the (CISM), Italy (2009).

Before joining Aberdeen, he was a Lecturer at the , England (2007-2009); a Research Scientist of the , , USA (2003-2007); a Guest Professor of , China (2004-2006); a Visiting Assistant Professor of the , , USA (2001-2003); a Research Assistant Professor of the , , USA (1998-2001); and a Postdoctoral Research Associate (1997) of the , .

Research

Research Overview

Research Areas

Accepting PhDs

I am currently accepting PhDs in Engineering.

Please get in touch if you would like to discuss your research ideas further.

Engineering

  • Supervising
  • Accepting PhDs
Teaching

Teaching Responsibilities

Currently:

1st half session:
Safety and Risk Management (51cg, Scotland)
Engineering Risk and Reliability Analysis (51cg, Scotland)

2nd half session:
Applied Risk Analysis & Management (51cg, Scotland)
Human Factors Engineering (51cg, Scotland)
Process Design, Layout and Materials (51cg, Scotland)
MEng Group Design (51cg, Scotland)

Previously:

Fundamental Safety Engineering and Risk Management Concepts (51cg, Scotland)
Subsea Integrity (51cg, Scotland)
Fluid Mechanics and Thermodynamics (51cg, Scotland)
Fluid Dynamics (51cg, Scotland)
Materials and Structures (51cg, Scotland)
Blast and Fire Engineering (51cg, Scotland)
Blast and Fire Resistant Structures (51cg, Scotland)

Explosion Engineering (University of Manchester, England)
Mechanical Design (University of Manchester, England)
Computation (University of Manchester, England)
Plasticity (University of Manchester, England)
Research Methodology (University of Manchester, England)

Simulation in Materials (Louisiana State University, United States)
Aircraft Structural Analysis (Louisiana State University, United States)
Deformation and Fracture of Engineering Materials (Louisiana State University, United States)
Engineering Materials Laboratory (Louisiana State University, United States)

Impact of Cellular Materials (International Centre for Mechanical Sciences, Italy)

Statics (Zhejiang University, China)

Publications

Page 1 of 2 Results 1 to 50 of 58

  • A Modular Digital Twin Architecture for Offshore Safety and Decision-Making: A North Sea Platform Case Study

    Hamzah, N., Mutallimov, T., Panaitescu, C., Grant, M., Cristofoli, G., Tan, H.
    Reliability Engineering & System Safety, vol. 274, 112428
    Contributions to Journals: Articles
  • A digital twin approach to noise exposure modelling and risk analysis

    Hamzah, N., Mutallimov, T., Panaitescu, C., Grant, M., Tan, H.
    Ocean Engineering, vol. 343, no. 5, 123629
    Contributions to Journals: Articles
  • A mechanical model for direct wafer bonding by strain energy under normal pressure

    Cai, S., Sun, Y., Wu, S., Tan, H.
    Journal of Mechanics of Materials and Structures, vol. 20, no. 1, pp. 1-14
    Contributions to Journals: Articles
  • Molecular dynamics investigation of nano-polishing on silicon carbide substrate with rough topography using a rotating diamond abrasive

    Wu, B., Sun, Y., Tan, H., Wu, S.
    Materials Today Communications, vol. 41, 110744
    Contributions to Journals: Articles
  • Safety assessment of hydrogen production using alkaline water electrolysis

    Muthiah, M., Elnashar, M., Afzal, W., Tan, H.
    International Journal of Hydrogen Energy, vol. 84, pp. 803-821
    Contributions to Journals: Articles
  • Using risk data as a source for human reliability assessment during shipping LNG offloading work

    Zhang, R., Zhang, Q., Hou, Z., Xv, W., Chen, S., Tan, H.
    Ocean Engineering, vol. 307, 118159
    Contributions to Journals: Articles
  • Risk based inspection and maintenance strategy for subsea pipelines using Bayesian influence diagram

    Sulaiman, N. S. A., Zakuan, N. A., Tan, H.
    AIP Conference Proceedings, vol. 2919, 120003
    Contributions to Journals: Articles
  • A Method for Identifying the Key Performance Shaping Factors to Prevent Human Errors during Oil Tanker Offloading Work

    Zhang, R., Meng, H., Ge, J., Tan, H.
    Journal of Marine Science and Engineering , vol. 10, no. 5, 688
    Contributions to Journals: Articles
  • Integration of Bayesian network with fuzzy analytical hierarchy process for determining the pipeline conditions

    Sulaiman, N. S. a., Tan, H., Zardasti, L., Md Noor, N.
    Process Safety Progress, vol. 41, no. s1, pp. s187-s196
    Contributions to Journals: Articles
  • A modified human reliability analysis method for the estimation of human error probability in the offloading operations at oil terminals

    Zhang, R., Tan, H., Afzal, W.
    Process Safety Progress, vol. 40, no. 3, pp. 84-92
    Contributions to Journals: Articles
  • Dynamic reliability analysis for residual life assessment of corroded subsea pipelines

    Aulia, R., Tan, H., Sriramula, S.
    Ships and Offshore Structures, vol. 16, no. 4, pp. 410-422
    Contributions to Journals: Articles
  • Dynamic reliability model for subsea pipeline risk assessment due to third-party interference

    Aulia, R., Tan, H., Sriramula, S.
    Journal of Pipeline Science and Engineering, vol. 1, no. 3, pp. 277-289
    Contributions to Journals: Articles
  • Probability analysis of damages to subsea pipeline

    Sulaiman, N. S., Tan, H.
    Process Safety Progress, vol. 39, no. S1, e12125
    Contributions to Journals: Articles
  • Dynamic reliability model for subsea pipeline risk assessment due to third party damage

    Aulia, R., Tan, H., Sriramula, S.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Decision-supporting models for human-reliability based safety promotion in offshore Liquid Natural Gas terminal

    Zhang, R., Tan, H.
    Safety and Reliability, vol. 38, no. 1-2, pp. 83-98
    Contributions to Journals: Articles
  • Offshore drilling blowout risk model: an integration of basic causes, safety barriers, risk influencing factors and operational performance indicators

    Perez, P., Dalu, G., Gomez, N., Tan, H.
    Safety and Reliability, vol. 38, no. 1-2, pp. 99-133
    Contributions to Journals: Articles
  • Prediction of Corroded Pipeline Performance Based on Dynamic Reliability Models

    Aulia, R., Tan, H., Sriramula, S.
    Contributions to Journals: Conference Articles
  • Dynamic reliability analysis of corroded pipeline using Bayesian Network

    Sulaiman, N. S. a., Tan, H.
    International Journal of Engineering and Technology(UAE), vol. 7, no. 4, pp. 210-215
    Contributions to Journals: Articles
  • Accident Precursor Probabilistic Method (APPM) for modeling and assessing risk of offshore drilling blowouts – A theoretical micro-scale application

    Perez, P., Tan, H.
    Safety Science, vol. 105, pp. 238-254
    Contributions to Journals: Articles
  • An Integrated Human Reliability Based Decision Pool Generating and Decision Making Method for Power Supply System in LNG Terminal

    Zhang, R., Tan, H.
    Safety Science, vol. 101, pp. 86-97
    Contributions to Journals: Articles
  • In vivo surface roughness evolution of a stressed metallic implant

    Tan, H.
    Journal of the Mechanics and Physics of Solids, vol. 95, pp. 430-440
    Contributions to Journals: Articles
  • Multi-objective Optimization of Power Supply System for Shipping Lng Off-loading Process Based on Switching Markov Chain and Genetic Algorithm

    Zhang, R., Tan, H.
    Chemical Engineering Transactions, vol. 48, pp. 697-702
    Contributions to Journals: Articles
  • Third Party Damages of Offshore Pipeline

    Sulaiman, N., Tan, H.
    Journal of Energy Challenges and Mechanics, vol. 1, no. 1, 3
    Contributions to Journals: Articles
  • Corrosion and Materials in the Oil and Gas Industries

    Javaherdashti, R. (ed.), Nwaoha, C. (ed.), Tan, H. (ed.)
    CRC Press, London. 721 pages
    Books and Reports: Books
  • Introduction, Corrosion and Materials: in the Oil and Gas Industries

    Williamson, R., Javaherdashti, R., Tan, H.
    Corrosion and Materials: in the Oil and Gas Industries. Javaherdashti, R., Nwaoha, C., Tan, H. (eds.). CRC Press, pp. xiii, 3-11, 9 pages
    Chapters in Books, Reports and Conference Proceedings: Chapters
  • The cohesive law of particle/binder interfaces in solid propellants

    Tan, H.
    Moscow: Torus Press. 8 pages
    Books and Reports: Commissioned Reports
  • Impact of cellular materials

    Tan, H., Qu, S.
    Cellular and porous materials in structures and processes: CISM International Centre for Mechanical Sciences. Altenbach, H., Öchsner, A. (eds.). Springer, pp. 309-334, 26 pages
    Chapters in Books, Reports and Conference Proceedings: Chapters
  • Constitutive model development of energetic materials by considering contributions from interfacial debonding

    Liu, C., Tan, H., Huang, Y.
    Los Alamos National Laboratory. 11 pages
    Books and Reports: Commissioned Reports
  • The viscoelastic composite with interface debonding

    Tan, H., Huang, Y., Liu, C.
    Composites Science and Technology, vol. 68, no. 15-16, pp. 3145–3149
    Contributions to Journals: Articles
  • Determination of the microscale stress–strain curve and strain gradient effect from the micro-bend of ultra-thin beams

    Shi, Z., Huang, B., Tan, H., Huang, Y., Zhang, T., Wu, P., Hwang, K., Gao, H.
    International Journal of Plasticity, vol. 24, no. 9, pp. 1606-1624
    Contributions to Journals: Articles
  • Multiscale Modeling of Dewetting Damage in Highly Filled Particulate Composites

    Geubelle, P. H., Inglis, H. M., Kramer, J. D., Patel, J. J., Kumar, N. C., Tan, H.
    AIP Conference Proceedings, vol. 973, no. 196, pp. 196-202
    Contributions to Journals: Articles
  • The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials

    Tan, H., Jiang, L., Huang, Y., Liu, B., Hwang, K.
    Composites Science and Technology, vol. 67, no. 14, pp. 2941-2946
    Contributions to Journals: Articles
  • Effect of interface debonding on the viscoelastic behavior of plastic-bonded explosives

    Tan, H.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Viscoelastic behaviors of plastic-bonded energetic materials accounting for nonlinear interface debonding

    Tan, H.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Constitutive behaviors of composites with interface debonding: the extended Mori–Tanaka method for uniaxial tension

    Tan, H., Huang, Y., Liu, C., Ravichandran, G., Paulino, G. H.
    International Journal of Fracture, vol. 146, no. 3, pp. 139-148
    Contributions to Journals: Articles
  • Cohesive modeling of dewetting in particulate composites: micromechanics vs. multiscale finite element analysis

    Inglis, H., Geubelle, P., Matouš, K., Tan, H., Huang, Y.
    Mechanics of Materials, vol. 39, no. 6, pp. 580-595
    Contributions to Journals: Articles
  • The uniaxial tension of particulate composite materials with nonlinear interface debonding

    Tan, H., Huang, Y., Liu, C., Ravichandran, G., Inglis, H., Geubelle, P.
    International Journal of Solids and Structures, vol. 44, no. 6, pp. 1809-1822
    Contributions to Journals: Articles
  • Continuum modeling of interfaces in polymer matrix composites reinforced by carbon nanotubes: Nano

    JIANG, L., TAN, H., WU, J., HUANG, Y., HWANG, K.
    NANO, vol. 02, no. 03, pp. 139-148
    Contributions to Journals: Articles
  • Effect of Nonlinear Interface Debonding on the Constitutive Model of Composite Materials

    Tan, H., Liu, C., Huang, Y., Geubelle, P. H.
    International Journal for Multiscale Computational Engineering, vol. 4, no. 1, pp. 147-168
    Contributions to Journals: Articles
  • The Mori–Tanaka method for composite materials with nonlinear interface debonding

    Tan, H., Huang, Y., Liu, C., Geubelle, P.
    International Journal of Plasticity, vol. 21, no. 10, pp. 1890-1918
    Contributions to Journals: Articles
  • The cohesive law for the particle/matrix interfaces in high explosives

    Tan, H., Liu, C., Huang, Y., Geubellec, P.
    Journal of the Mechanics and Physics of Solids, vol. 53, no. 8, pp. 1892-1917
    Contributions to Journals: Articles
  • An Energy Approach to a Micromechanics Model Accounting for Nonlinear Interface Debonding

    Tan, H., Huang, Y., Geubelle, P., Liu, C., Breitenfeld, M.
    41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. American Institute of Aeronautics and Astronautics Inc.
    Chapters in Books, Reports and Conference Proceedings: Chapters
  • 8.12 - Combined Atomistic and Continuum Simulation of Fracture and Corrosion

    Tan, H.
    Comprehensive Structural Integrity. Milne, I., Ritchie, R., Karihaloo, B. (eds.). Pergamon, pp. 413-451, 39 pages
    Chapters in Books, Reports and Conference Proceedings: Chapters
  • Hierarchical, adaptive, material point method for dynamic energy release rate calculations

    Tan, H., Nairn, J. A.
    Computer Methods in Applied Mechanics and Engineering, vol. 191, no. 19, pp. 2123-2137
    Contributions to Journals: Articles
  • Dynamic deformation signatures in reinforced concrete slabs for condition monitoring

    Tan, H. C., Famiyesin, O., Imbabi, M.
    Computers & Structures, vol. 79, no. 26-28, pp. 2413-2423
    Contributions to Journals: Articles
  • Evolution of a Surface-Roughness Spectrum Caused by Stress in Nanometer-Scale Chemical Etching

    Kim, K., Hurtado, J. A., Tan, H.
    Physical Review Letters, vol. 83, no. 19, pp. 3872-3875
    Contributions to Journals: Articles
  • Toughening mechanisms of nano-composite ceramics

    Tan, H., Yang, W.
    Mechanics of Materials, vol. 30, no. 2, pp. 111-123
    Contributions to Journals: Articles
  • Catastrophic fracture induced fracto-emission

    Tan, H., Yang, W.
    Journal of Materials Science, vol. 31, no. 10, pp. 2653-2660
    Contributions to Journals: Articles
  • Nonlinear motion of crack tip atoms during cleavage processes

    Tan, H., Yang, W.
    International Journal of Fracture, vol. 77, no. 3, pp. 199-212
    Contributions to Journals: Articles
  • A numeric study on chaotic dislocation emission

    Tan, H., Yang, W.
    Communications in Nonlinear Science and Numerical Simulation, vol. 1, no. 1, pp. 10-14
    Contributions to Journals: Articles
Show 10 | 25 | 50 | 100 results per page

Refine

Books and Reports

Chapters in Books, Reports and Conference Proceedings

Contributions to Journals

Contributions to Specialist Publications