51cg

People

Dr Mehmet Kartal

Dr Mehmet Kartal
Dr Mehmet Kartal
Dr Mehmet Kartal

Reader

51cg
Email Address
mehmet.kartal@abdn.ac.uk
Telephone Number
+44 (0)1224 272495
Office Address

School of Engineering, 51cg, Fraser Noble Building (room 252), King’s College Aberdeen, AB24 3UE, United Kingdom

School/Department
School of Engineering


Biography

Work Experience

Reader in Mechanical Engineering, 51cg, 08/2021 - Present

Senior Lecturer in Mechanical Engineering, 51cg, 08/2016 - 07/2021

Lecturer in Mechanical Engineering, 51cg, 09/2014 - 07/2016 

Post-doctoral Research Assistant, University of Oxford, 01/2008 - 08/2014

Memberships and Affiliations

Internal Memberships

Director of Post-Graduate Research Students (2022-present)

Post-Graduate Research Officer (2025-present) 

Programme Coordinator for the MSc in Advanced Mechanical Engineering (2017 -2023)

Programme Coordinator for the MSc in Advanced Structural Engineering (2021 -2023)

Coordinator of Non-Destructive Testing Services (μCT) (2016 - present)

External Memberships

Panel member of the Royal Society’s Newton International Fellowships Committee (2025-present)

External Examiner for MSc programmes at Liverpool John Moores University (2022-present)

Associate Editor of International Journal of Mechanical Sciences (2024-present)

Fellow of the Institute of Mechanical Engineers (2020-present) 

Panel member of the Royal Society's International Exchanges Committee (2016-2023)

External Examiner for PhD vivas (2016-present)

Guest Editor of Metals (2021-2023)

Reviewer for

  • Additive Manufacturing
  • Experimental Mechanics
  • International Journal of Fatigue
  • Wear
  • Materials & Design
  • Composites Part A
  • Engineering Fracture Mechanics
  • International Journal of Solids and Structures
  • International Journal of Mechanical Sciences
  • The Journal of Strain Analysis for Engineering Design
  • Tribology International
  • ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik
  • The Journal of Engineering
  • Strojniški vestnik – Journal of Mechanical Engineering
  • International Journal of Pressure Vessels and Piping
Research

Research Overview

Micromechanical modelling

Contact mechanics

Residual stresses and eigenstrain theory

Experimental mechanics

Mechanics of materials

Funding and Grants

External Grants Awarded

  • M.E. Kartal. 3D in-situ based methodology for optimizing the mechanical performance of selective laser melted aluminium alloys. EPSRC, £101k, 2018-2021
  • M.E. Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 2). Oil and Gas Innovation Centre (Phase 2), £260, 2018-2020
  • M.E.Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 1). Oil and Gas Innovation Centre, £68k, 2017-2018
  • M.E. Kartal. Multiscale Experimental and Computational Techniques for Optimizing Selective Laser Melting Additive Manufacturing Process Parameters. NSIRC/TWI PhD Sponsorship 2016, £44k, 2016-2019
  • M.E. Kartal., I. Guz and M. Kashtalyan. KTP between 51cg and Westerton. Department of Trade and Industry (Knowledge Transfer Partnership), £150k, 2016-2017.
  • M.E. Kartal. Three-dimensional in-situ measurements of deformation using the x-ray microscope and microtest stage. The Royal Society Research Grant, £15k, 2015-2016.
  • A.C.F. Cocks and M.E. Kartal. Measurements of residual stresses in ultra-thick steel welds and analysis of relationship between residual stresses and fatigue fracture. Welding and Joining Research Group Technical Research Laboratories POSCO, $50k, 2011-2013.
Teaching

Teaching Responsibilities

EM3028:Engineering Materials

EG4529/EM4529 Nonlinear Mechanics

EG5096 Fatigue and Fracture Mechanics

EG50T7 Subsea Construction, Inspection and Maintenance

EG5565 MEng Group Design

EG4013 MEng/BEng Individual Projects in Mechanical Engineering

Publications

Page 1 of 2 Results 1 to 50 of 75

  • A Review of Hydrogen–Cement Interactions for Underground Hydrogen Storage

    Wang, H., Kartal, M., Ma, L., Freitas, D., Liang, Z., Zhou, Y.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
    • [ONLINE]
    • [ONLINE] DOI:

  • A Critical Review on Transport and Mechanical Property of Well Cement for Underground Hydrogen Storage

    Wang, H., Zhou, Y., Kartal, M., Ma, L.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
    • [ONLINE] DOI:

  • Interaction of defects, martensitic transformation and slip in metastable body centred cubic crystals of Ti-10V-2Fe-3Al: A study via crystal plasticity finite element methods (CPFEM)

    Christie, P., Siddiq, A., McMeeking, R., Kartal, M.
    International Journal of Damage Mechanics, vol. 34, no. 1, pp. 157 - 185
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • The Influence of Post-Thermal Treatments on Microstructure and Mechanical Properties in A20X Alloy Fabricated through Powder Bed Fusion

    Koelblin, J., Cruchley, N., Chamberlin, J., Siddiq, A., Mulvihill, D. M., Kartal, M.
    Journal of Manufacturing Processes, vol. 125, pp. 93-110
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Crystal plasticity based constitutive model for deformation in metastable β titanium alloys

    Christie, P., Siddiq, M., Asim, U., McMeeking, R., Kartal, M.
    Modelling and Simulation in Materials Science and Engineering, vol. 32, no. 5, 055023
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Exploring North Sea Fractured Sandstone Properties: Artificial Intelligence, Multiscale Imaging, Pore-Fracture Network Analysis and Experimental Results

    Panaitescu, C. T., Wu, K., Kartal, M. E., Tanino, Y., Starkey, A., Qin, G., Zhao, L., Cao, Z., Wu, S.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
    • [ONLINE] DOI:
    • [ONLINE]

  • Residual Stresses in Alloy IN718 Produced through Modulated Laser Powder Bed Fusion

    Georgilas, K., Guo, H., Ahmad, B., Khan, R. H., Fitzpatrick, M. E., Kartal, M.
    Experimental Mechanics, vol. 64, pp. 181-195
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • The static friction peak in reciprocating sliding

    Bin Jaber, S., Xu, Y., Kartal, M. E., Gadegaard, N., Mulvihill, D. M.
    Tribology International, vol. 180, 108240
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • 3D Printing and Rapid Replication of Advanced Numerically Generated Rough Surface Topographies in Numerous Polymers

    Perris, J., Kumar, C., Xu, Y., Tassieri, M., Kartal, M. E., Gadegaard, N., Mulvihill, D. M.
    Advanced Engineering Materials, vol. 25, no. 1, 2200832
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Optimisation of interlocking microstructured adhesive joints via finite element modelling, design of experiments and 3D printing

    Hamilton, A., Xu, Y., Kartal, M. E., Kumar, S., Gadegaard, N., Mulvihill, D. M.
    International Journal of Adhesion and Adhesives, vol. 120, 103292
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Investigation of Novel Post-Thermal Treatments of Alloy 718 Fabricated by Modulated Laser Powder Bed Fusion

    Georgilas, K., Sergi, A., Khan, R. H., Kartal, M.
    Materials Science and Engineering A, vol. 849, 143502
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • A Multiscale Constitutive Model for Metal Forming of Dual Phase Titanium Alloys by Incorporating Inherent Deformation and Failure Mechanisms

    Asim, U. B., Siddiq, M. A., McMeeking, R., Kartal, M.
    Modelling and Simulation in Materials Science and Engineering, vol. 30, no. 2, 025008
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Deformation of AlSi10Mg parts manufactured by Laser Powder Bed Fusion: In-situ measurements incorporating X-ray micro computed tomography and a micro testing stage

    Koelblin, J., Hastie, J., Kartal, M., Siddiq, A., Attallah, M. M.
    Procedia Structural Integrity, vol. 35, pp. 168-172
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Effect of Hydrogen and Defects on Deformation and Failure of Austenitic Stainless Steel

    Ogosi, E., Siddiq, A., Asim, U. B., Kartal, M. E.
    Recent Developments in Analytical Techniques for Corrosion Research. Toor, I. U. (ed.). Springer International Publishing AG, pp. 235-257, 23 pages
    Chapters in Books, Reports and Conference Proceedings: Chapters
    • [ONLINE] DOI:
    • [ONLINE]

  • Mesoscale Model for Predicting Hydrogen Damage in Face Centred Cubic Crystals

    Ogosi, E., Siddiq, A., Christie, P., Asim, U. B., Kartal, M. E.
    Physical mesomechanics, vol. 24, pp. 588-597
    Contributions to Journals: Articles
    • [ONLINE] DOI:

  • Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions

    Hastie, J. C., Koelblin, J., Kartal, M., Attallah, M. M., Martinez, R.
    Materials & Design, vol. 204, 109645
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Computational Modelling of Microstructural Deformation in Metastable β Titanium Alloys

    Christie, P., Siddiq, A., McMeeking, R., Kartal, M.
    UK Association of Computational Mechanics Conference
    Contributions to Conferences: Abstracts
    • [ONLINE]

  • Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking

    Hamilton, A., Xu, Y., Kartal, M., Gadegaard, N., Mulvihill, D. M.
    International Journal of Adhesion and Adhesives, vol. 105, 102775
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Friction of flat and micropatterned interfaces with nanoscale roughness

    Jaber, S. B., Hamilton, A., Xu, Y., Kartal, M. E., Gadegaard, N., Mulvihill, D. M.
    Tribology International, vol. 153, 106563
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Tailorable and Repeatable Normal Contact Stiffness via Micropatterned Interfaces

    Perris, J., Xu, Y., Kartal, M., Gadegaard, N., Mulvihill, D. M.
    Tribology Letters, vol. 69, 106
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [OPEN ACCESS]

  • Crystal Plasticity based Study to Understand the Interaction of Hydrogen, Defects and Loading in Austenitic Stainless Steel Single Crystals

    Ogosi, E., Siddiq, A., Asim, U. B., Kartal, M. E.
    International Journal of Hydrogen Energy, vol. 45, no. 56, pp. 32632-32647
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Hydrogen effect on plastic deformation and fracture in austenitic stainless steel

    Ogosi, E., Asim, U. B., Siddiq, A., Kartal, M. E.
    Contributions to Journals: Conference Articles
    • [ONLINE]
    • [ONLINE]

  • Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: influence of processing parameters and heat treatment

    Hastie, J. C., Kartal, M., Carter, L. N., Attallah, M. M., Mulvihill, D. M.
    Materials Characterization, vol. 163, 110225
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Modelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel

    Ogosi, E. I., Asim, U. B., Siddiq, M. A., Kartal, M. E.
    Journal of Mechanics, vol. 36, no. 2, pp. 213-222
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties

    Georgilas, K., Khan, R. H., Kartal, M. E.
    Materials Science and Engineering A, vol. 769, 138527
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]

  • Contrast-enhancing staining for microCT-based visualisation of the fibrous structure in the human Achilles tendon enthesis

    Eerden, J., Kartal, M., Kerckhofs, G., Gröning, F.
    Contributions to Conferences: Oral Presentations
    • [ONLINE]

  • A CPFEM based study to understand the void growth in high strength dual-phase Titanium alloy (Ti-10V-2Fe-3Al)

    Asim, U. B., Siddiq, M. A., Kartal, M. E.
    International Journal of Plasticity, vol. 122, pp. 188-211
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]
    • [ONLINE]
    • [ONLINE]

  • Analysing size and shape of internal processing defects within selective laser melted aluminium alloy using x-ray micro computed tomography

    Hastie, J. C., Kartal, M. E., Attallah, M. M., Carter, L. N.
    Alloys for Additive Manufacturing Symposium 2019, pp. 49-49
    Contributions to Conferences: Abstracts
    • [ONLINE]

  • Effect of post-thermal treatments on microstructure and mechanical properties of L-PBF IN718 material

    Georgilas, K. P., Kartal, M. E., Khan, R. H.
    Contributions to Conferences: Papers

  • Influence of recycled Inconel 718 powder on pulsed laser powder bed fusion additive manufacturing material

    Georgilas, K. P., Khan, R. H., Kartal, M. E.
    Contributions to Conferences: Papers
    • [ONLINE]
    • [OPEN ACCESS]

  • Characterisation of heat treated, additively manufactured Inconel 718

    Georgilas, K. P., Khan, R. H., Kartal, M. E.
    Contributions to Conferences: Papers

  • Representative volume element (RVE) based crystal plasticity study of void growth on phase boundary in titanium alloys

    Asim, U. B., Siddiq, M. A., Kartal, M. E.
    Computational Materials Science, vol. 161, pp. 346-350
    Contributions to Journals: Articles
    • [ONLINE]
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Hydrogen effect on fracture behaviour of austenitic stainless steel

    Ogosi, E. I., Siddiq, A., Asim, U. B., Kartal, M.
    Contributions to Conferences: Papers
    • [ONLINE]

  • The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments

    Uzun, F., Everaerts, J., Brandt, L., Kartal, M. E., Salvati, E., Korsunsky, A.
    Journal of Manufacturing Processes, vol. 36, pp. 601-612
    Contributions to Journals: Articles
    • [ONLINE] DOI:

  • Probing the compressive failure mechanisms in syntactic foam using X-ray micro-computed tomography

    Kartal, M. E.
    Contributions to Conferences: Papers

  • Characterisation of Additively Manufactured Inconel 718 via Laser Powder Bed Fusion Additive Manufacturing

    Georgilas, K. P., Khan, R. H., Kartal, M.
    Contributions to Conferences: Papers

  • Contribution of finite element analyses to crack-like flaw assessments in a gas pipeline

    Thibault, J., Kartal, M. E., Du Suau, G., Hertz-Clémens, S.
    International Journal of Pressure Vessels and Piping, vol. 161, pp. 41-49
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Hydrogen effect on plastic deformation and void growth in austenitic stainless steel

    Ogosi, E. I., Asim, U. B., Siddiq, M. A., Kartal, M. E.
    Contributions to Conferences: Papers

  • RVE based crystal plasticity study of void growth on phase boundary in titanium alloys

    Asim, U. B., Siddiq, M. A., Kartal, M. E.
    Contributions to Conferences: Papers

  • Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography

    Kartal, M. E., Dugdale, L. H., Harrigan, J. J., Siddiq, M. A., Pokrajac, D., Mulvihill, D. M.
    Journal of Materials Science, vol. 52, no. 17, pp. 10186-10197
    Contributions to Journals: Articles
    • [ONLINE] DOI:
    • [OPEN ACCESS]

  • Effect of SLM process parameters on porosity and surface roughness of Inconel 718

    Georgilas, K. P., Ankalkhope, U., Kartal, M. E., Khan, R. H.
    The National Structural Integrity Research Centre (NSIRC) Conference 2017
    Contributions to Conferences: Posters

  • Effect of SLM process parameters on porosity, surface roughness and microstructure of Inconel 718

    Georgilas, K. P., Ankalkhope, U., Kartal, M. E., Khan, R. H.
    European Congress and Exhibition on Advanced Materials and Processes
    Contributions to Conferences: Posters

  • Representative Volume Element (RVE) based crystal plasticity study of void growth at phase boundary in titanium alloys

    Asim, U. B., Siddiq, M. A., Kartal, M. E.
    7th National Student Conference in Metallic Materials
    Contributions to Conferences: Posters

  • The Influence of welding procedure and plate geometry on residual stresses in thick components

    Kartal, M. E., Kang, Y., Korsunsky, A., Cocks, A., Bouchard, J.
    International Journal of Solids and Structures, vol. 80, pp. 420-429
    Contributions to Journals: Articles
    • [ONLINE] DOI:

  • The effect of specimen size and surface conditions on the local mechanical properties of 14MoV6 ferritic–pearlitic steel

    Molak, R. M., Kartal, M. E., Pakiela, Z., Kurzydlowski, K.
    Materials Science and Engineering A, vol. 651, pp. 810-821
    Contributions to Journals: Articles
    • [ONLINE] DOI:

  • Crystal Plasticity based Finite Element Analysis of Void Growth in High Strength Alloys

    Asim, U. B., Siddiq, M. A., Kartal, M. E.
    Contributions to Conferences: Papers

  • Determination of sub-surface stresses at inclusions in single crystal superalloy using HR-EBSD, crystal plasticity and inverse eigenstrain analysis

    Kartal, M. E., Kiwanuka, R., Dunne, F. P. E.
    International Journal of Solids and Structures, vol. 67-68, pp. 27-39
    Contributions to Journals: Articles
    • [ONLINE] DOI:

  • Analytical Solutions for Calculating Residual Stresses from Experimental Measurements Using the Contour Method

    Kartal, M. E.
    9th European Solid Mechanics Conference
    Contributions to Conferences: Abstracts
    • [ONLINE]

  • The effect of crystallographic orientation on crack tip stress fields in hcp titanium

    Kartal, M. E., Cuddihy, M., Dunne, F.
    20th European Conference on Fracture
    Contributions to Conferences: Abstracts
    • [ONLINE]

  • Effects of crystallographic orientation and grain morphology on crack tip stress state and plasticity

    Kartal, M. E., Cuddihy, M. A., Dunne, F. P. E.
    International journal of fatigue, vol. 61, no. 46-58, pp. 46-58
    Contributions to Journals: Articles
    • [ONLINE] DOI:
Show 10 | 25 | 50 | 100 results per page

Refine

Chapters in Books, Reports and Conference Proceedings

Contributions to Conferences

Contributions to Journals

Update